The Offshore Voyaging Reference Site

We Can’t Do It All

Part of the engine installation project on Morgan’s Cloud was the fitting of new engine mounts—which meant welding, which meant sparks flew, which meant the paint in the engine room got speckled. (Morgan’s Cloud’s builder did a wonderful job of most things, but painting the bilge in the engine room was not one of his better ideas.)

We last painted the engine room when we installed the Cummins 15 years ago. Add the present welding speckles to those 15 years of wear and tear, exacerbated by aluminum’s rejection of paint, and we were seriously questioning whether we should paint again while we had the chance.

But we decided not to. Instead, we gave the engine room a good scrub, said “good enough”, and took the time saved to do an extremely thorough job of installing two seacocks (we needed a new one for the engine exhaust drain and we needed to replace an old worn one).  In the grand scheme of things, we decided that ensuring (as much as we can) that the boat won’t sink was a whole lot more important than a freshly painted engine room.

Which reminded us of an incident that happened a few…okay, a lot of (where is the time going?)…years ago in the Caribbean. We had met the captain and cook of a big sister to Morgan’s Cloud and invited them to our boat for drinks. After a few, they admitted that they had seriously discussed coming over to Morgan’s Cloud and polishing our stainless steel stanchions and dodger bows—the rust spots were driving them crazy!

We just don’t have enough time and energy to keep Morgan’s Cloud looking like a yacht, keep her systems in good working order, and still do the creative stuff we enjoy like writing and taking photographs. So, yeah, our stainless is rusty, we don’t always get to the exterior varnish in time, our topsides aren’t polished, and the paint in the engine room is speckled.

But the engine and generator are always serviced on time, we do a rig check before each ocean passage, we will put hours of time and tons of energy into stuff like making sure we’ve got a heavy weather strategy in place and then testing it, and we’ll spend several days installing two seacocks. We’ve realized we can’t do it all, so we’ve chosen to let the cosmetics go and focus on the important stuff.

However, if you are sharing an anchorage with us and those rust spots are driving you really crazy…come on over. We’ve got rags and a full bottle of metal polish (we carry it around just in case)!

Do you think ours is a good policy, or are we just lazy? Leave a comment and let us know what you think.

13 Comments
Oldest
Newest
Inline Feedbacks
View all comments
Gary Ramos

Yes Phyllis, There are more important things to keep up on. Last week they had to cut two big sections of the bow out in Arctic Wanderer. I never thought about the chain locker, that it would rust out. It did take 27 years. Now I have to figure out how to prevent it. I have to make some sort of pan to catch the saltwater and drain it into the bilge 20ft aft. I’m so glad the welder found this problem as it could have sunk her.
Cosmetics top side, yea they can wait.

Robert in Norway

Already today, and probably more so in the future, it will be a bad idea to shine up your boat and make yourself a target for theft and harassment. Remember that we who cruise around on a pleasure yacht are wealthy capitalists to any harbor lowlife who fancies himself a sort of Robin Hood. The same goes for some underpaid Capitania del Puerto. My strategy is to look somewhat shabby and poor, not worth ripping off. It helps if you have a smaller boat. And it saves a lot of work!

Victor Raymond

I totally agree. I spend a lot of wasted time trying to keep my fiberglass boat looking “nice”. One of my attactions to an aluminum boat would be that it need not be painted at all. I would have no wood topside to keep shiny. Stations would be aluminum too so there is nothing to keep shiny. Hose down and you are good to go. There is enough “serious” maintenance without having to worry about looks.

Eric Schlesinger Sue Peterson

Dear AAC,
My wife and I take about 8 weeks every spring doing yearly maintenance. First there is all the usual mechanical and head and galley stuff. Then repair and varnish all the teak and paint the topsides, varnish the spars, (a Gillmer gaff rig ketch)…The list goes on and on… I guess that an unhealthy dash of ego does get mixed up in this, but she sure looks pretty when we finally launch.
Cheers, Sue and Eric

don

Phyllis
If you spend your time trying to please everyone else you will never please yourself. Enjoy, it’s not a dress rehearsal.