The Offshore Voyaging Reference Site

A Sailor’s Motorboat

"Morgan's Cloud", a McCurdy and Rhodes 56' cutter, seen beside an arch berg with glacier and mountain behind, a typical East Greenland scene. The icecap reaches down to the sea in numerous glaciers and there are a floating profusion of bergs and smaller pieces of ice to be carefully avoided.

Phyllis and I own a better motorboat, for our purposes, than most motorboats. Let me explain why I say that and why it matters.


Login to continue reading (scroll down)

84 Comments
Oldest
Newest
Inline Feedbacks
View all comments
Simon Wirth

Hi John
I have stumbled over Steve and Lindas webpage shortly after getting interested in ernest about cruising. One of his articels, I think it is under the section of Wind Horse (FPG 84) on setsail.com where he does the same calculation.
He does it based on realworld data from Beowulf VII (78ft ketch) and Wind Horse. And his resolt was a bit of a knock back, as he comes to the similar conclution as you. Maintaining and cruising Beowulf was actually more expensive than motoring Wind Horse around.
Disapointing, in a way.
But sailing is still more fun, so we who still can should take advantage of it as long as we can.
Regards
Simon

paul shard

There is an excellent and interesting design called a Diesel Duck…
Very good friends of ours built one of the first Diesel Ducks (in aluminum) and we have filmed two episodes of Distant Shores aboard her (San Blas Islands and BVI). They have done many miles and circumnavigated South America in her. Small engine, efficient hull shape plus a controllable variable pitch propellor for extra efficiency! a Very cool boat!

http://www.dieselducks.com/

paul shard

Hi John,
Diesel Duck was certainly slower than your boat but at just 40 feet is more comparable to the Adventure 40 than your lovely Morgans Cloud! I do not know fuel burn numbers but you might be right that a pure sailboat hull could be better. The controllable propeller on Diesel Duck was another advantage for them though… it would be nice to see more options for CPP available for sailors…

richard s.

wouldn’t the initial capital costs of the two boats (sail and converted sail) be about the same ? maint and dockage costs would be the same…the only significant overall difference to me is sailing is much more rewarding psychologically

richard s.
tampa bay, s/v lakota

Simon Wirth

If the fuelburn is the same for this two boats, the sailboat would also have the additional cost of sails and rig maintenance. Provided this is the only difference in the boats in regard to maintenance, the sailboat will lose in cost per mile.
If I have overlooked some inherent cost difference, I’ll be glad to hear about it.
Regards
Simon

Rick Steinberg

We have a 41′ Defever, full displacement, 120 Ford Lehman and we get 4 to 5 nautical miles per gallon. In all conditions. We cruise the Bahamas and and The Fl Keys.

Victor Raymond

John, You have come to just about the same conclusions as Steve Dashew. You are right though we are not all as financially fortunate as his clients.
I was just quoted $30,000 for new sails by Carol Hasse in Port Townsend. Yes, they will be great sails and last a long time with care but…….It does take one’s breath away.
Another solution is to purchase my exact hull as a motor boat that is designed to cross oceans and has about a 3000 mile range with 4000 liters of fuel instead of 1000.
Anyhow just another thought. I think you are on the right track. Maybe the main problem is the cost of sails and rigging maintenance.

Jeffrey Siegel

Your trawler fuel rates are a bit fa-ka-ka. You’re comparing a 52,000 displacement sailboat with a much larger motorboat (did you provide the trawler displacement and I missed it…or was it left out as a bit of slight-of-hand?). The pilothouse photo is an example of a boat that’s obviously double-decked providing substantially more living area than the sailboat. It’s also quite obviously a very large trawler. I’d love to see comparison photos of each stand-up engine room (I know you said the trawler was larger but I’d bet even that’s an understatement).

Beebe had all of this explained years ago, and I know you referenced him but you didn’t mention his book and especially the later addition “Voyaging Under Power” done with Nordhavn’s designer. In it he gave real data that proves dead on from my experience of 11 years on a trawler.

It should be noted too that most sailboats require piloting while being outside in the elements. Most trawlers provide both a flybridge for outside piloting in comfortable weather and a safe, environmentally controlled inside pilothouse. Today we cruised up the Hudson River in 95 degree heat. Inside our air-conditioned pilothouse, it was enjoyable to watch the river go by. The passing sailboats, on the other hand, couldn’t take enough clothes off to make the trip enjoyable – I can’t imagine how awful it was for them. As we’ve also seen many times, cold weather provides the exact same comparison. While you’re bundled up braving the elements, I’m sipping coffee from a normal mug, wearing normal clothes, no coat, and in my slippers.

I’ve put on enough uncomfortable miles from a sailboat cockpit. It’s not an endurance sport and many of us like to cruise comfortably. I’d dare say that most women find comfort preferable too and I sure like having my wife along full time.

Jeffrey Siegel

John, you know exactly what fa-ka-ka means. It’s hard to imagine the trawler you showed being less than 80,000 lbs of displacement and it’s more likely over 100,000 lbs. My smaller 53′ is 80,000 lbs and the pilothouse you pictured is a fair amount larger with 4 windows across as compared to my 3. In fact, what trawler is that? I can get you the displacement.

Most cruising trawlers operate at under displacement speeds – 1.34 * sqrt(waterline length). If you do that, and have a properly sized engine, you’ll get at least 2 miles per gallon. Smaller trawlers will get up to 4 miles per gallon (1.75 gallons at 7 kts). These are all approximate but I can tell you specifically that I always get 2 miles per gallon.

I honestly think that you had a predisposed conclusion before you started writing the posting. If you stepped back and honestly looked at real data, you’d likely come up with a different result. And while the germs of facts are in your piece, the positioning of it is quite clear.

richard s.

jeff, john said he doesn’t know the meaning of ‘f..k…k’ so he doesn’t…nor do i for that matter to the point that i don’t even care to spell it out above…surely you must see that he is not critical of trawlers and even hints that he could feasibly take the right one on in place of morgan’s cloud at some point down the road…you seem to have your nose out of joint for no reason on this, and i think you owe john an apology for it please

richard s.
tampa bay, s/v lakota

Robert

I don’t know what fa-ka-ka is either, but it is really hard to type!

Robert

Robert

Sounds like the right boat choice for you. So for another perspective….for me personally, the experience you described sounds like the ship simulator at the local merchant marine school (maybe not the slippers)….fun for awhile, but ultimately I got bored**. I’d rather be out in the weather, even if crappy. My wife rolled her eyes at the women comment. Guess she’s not “most women.” So that’s why we have different kinds of boats in the world for all these different types of people.

Robert
** not really….the operator can make the simulator do really mean things to you.

Nicolas Hadjipavlou

Hi John,
Great article.
Why not put a CPP on a sailboat maybe coupled to a cruising generator. Like this motoring efficiency can be achieved as well as plenty of power for thrusters/windlass without adding extra batteries.

Andre Langevin

I completely agree with John’s point of view (and many others that have shared it) and i also respect the owners of motor boats, trawlers and all of them. For by today we are all operating “motor boats”, we call sailors the one who has alternate propulsion but it come at a price. I remember the price tag for putting a 56 feet mast with ocean sails while building the Chatam43, price tag as of 2012 is 80 000 $ for all the rigging. My centerboard swing-keel flat bottom multi-chine steel 47 feet sailboat is 33 000 pounds and have a 75 hp engine to cruise 6.0 knots at 1 US gallon per hour or 4 US gallons per hour for 8.5 knots. Those 2.5 knots are costly but this is the waterline formulae playing in. It is interesting to say that it is very easy to do 8.5 and even 10 knots with 20 knots of wind. This is the same thing i heard from the Eagle staff (the US coast guard school vessel), they are doing 12 knots on engine and 18 knots with sails.

One of the principal adventage of a sailboat is the static oscillation absorbing feature of a mast. Having used the boat without a mast in 2011 before installing it, i can testifie of the huge difference in the rolling and pitching behavior of the boat. Just having that stick in the air is a powerfull static stabilizer. Add a little bit of cloth in a 25-35 knots cross sea and you’re planning on wave crest insted of being tossed inside. What will happen over time as i get older is that my fuel usage will go up and i will use the engine more often simply 🙂

Jeffrey Siegel

> One of the principal adventage of a sailboat is the static
> oscillation absorbing feature of a mast.
I’m assuming you’re giving this as a principal advantage over a trawler? Just curious Andre, have you spent much offshore time on a trawler with stabilizers?

Andre Langevin

>Jeffrey

I can’t testifie for a trawler, haven’t had the opportunity to cruise more than a few hours in ideal conditions. I would like to know more though as i am curious about boat dynamics – anyboat i am not bound to either the sail or the motor sect. I happen to have built a sailboat but my previous boat was a motorboat…. my motivation was using the sail for long distance cruising. I am currently cruising the Eastern Canada provinces (Newfoundland and Golf St-Lawrence) and i have to admit that overall i would have done 60 % of my cruise on the motor altough i have sails. Here are the reasons:

I don’t sail in fog, this is a almost full time phenomena here.
I don’t sail in thunderstorm, i start the engine, move inside the boat.
I alway have some sort of schedule so having the choice of doing a full 20 hours of sail instead of straight line 6 hours is convincing.
I am conscious that the rigging need maintenance and it is somewhat fragile. Better spend 300 $ of fuel than bring your sail to the sailmaker for a repair (it is very costly to repair sails)
If i weight the investment of the rigging (80 k$) versus the engine (15 k$) and if i put maintenance as equal between the two; i prefer to maintain and replace the engine. So i take my sail with the uttermost respect.

Basically i consider my boat as being a motorboat, displacement type. Sailing is optionnal when everything is in place.

Could you say more about the behavior of your boat in different wind wave combination ?

Cheers

Larry Robbins

At the risk of a slight veer and opening a can of worms, I think it appropriate to talk of the joy of cutting the engine outside a harbor and finessing the wind to silently slip towards a destination.
I think the wear and tear on a well maintained and operated sail rig is easier to keep up with than with a mechanical propulsion system. Of course, on my Tartan 37, I do not have a stand up engine room and access to the sides and rear are difficult under way.
The feeling of security of a get home wind driven propulsion system can’t be overstated.
OTOH, a pilothouse out of the weather would open up chilly climates to be desirable destinations.

Bob M
Bob M

Simples!
Just add waterline length (with little increase in beam) for more interior. But I suppose it wont be long before we are into Steve Dashews market.

RDE

Hi John,
It is instructive to look at Steve Dashew’s analysis of powerboat stability in this context. http://setsail.com/evaluating-stability-and-capsize-risks-for-yachts

Apart from the many well thought out concepts that he develops, take close note of the hull form (of the 64′ version I believe).

If a relatively flat bottom and a long sailboat-style keel are a “brilliant” solution for a somewhat similar sized voyaging power boat then Steve Dashew must have it all wrong.

If I were a betting man I know where I’d place my bets!

Frank Osborne

John,
You are right, an economical trawler can be designed and built but there is no market for that type of boat, other than perhaps you and a couple of others. People who buy the large trawlers like you describe above want all the comforts of a million dollar condo, not economy. I heard one trawler designer say that people who spend over a million dollars on a boat are not concerned about fuel burn rates.

7 Years ago my wife and I bought a 13 year old 46 Nordhavn, the original Nordhavn design that is smaller, rounder, and lower in the water than the newer designs. We do pay a price for the lower profile with a “crawl in” engine room but we love our small boat. In 15K miles up and down the Pacific coast from Alaska to southern MX we average 1.8 gph at 6 kts with the paravane stabilizers deployed. It’s not the perfect boat and it’s not right for everyone but it fits us perfectly and is small and simple enough for the two of us to operate and maintain.

RDE

Why settle for trying to push a brick through the water or buying an early Nordhavn and starting the refit struggle all over again when you already have a better motorboat in Morgan’s Cloud? (with a new engine already installed) And she’s better looking than any motorboat on the planet. Unless you really do secretly covet more room!) LOL

Have Ed Joy design a doghouse with back doors to allow her to be driven as a pilothouse motorsailor. And if you want to stop her rolling, we installed a set of NIAD retractable active stabilizers that folded flat into the hull on a 112′ S & S 15 years ago. Money for sure, but probably less than trading to a tubby trawler.

RDE

Hi John,
I should have been more clear: the brick I was referring to would be a new trawler from almost any manufacturer, not an older and more efficient hull form like the 46.

And the doghouse I was referring to would be more like the Boreal design or the Sundeer 56 version with watertight doors, just big enough for a fore and aft seat, not an entirely enclosed center cockpit which of course would ruin Morgan’s Cloud as a sailboat.

steve

Hi John,
Love the article, it makes one think about a lot of interesting ideas. I may have missed something in comparative cost in the article. I can see the costs you mention as very true but did you leave out the cost difference of buying a new 56 foot sail boat compared to a new 56 foot ocean going trawler? I’m sure the Trawler must be over twice as expensive. Even a 50 foot ocean going trawler must be way more expensive than a new sailboat.
Thought you might like to know our Boreal is launched and we start sea trials in a few days. The company has worked hard to make Tracy and I very happy. Maybe in 8 or ten years we will want the ocean going motor boat we will see.

Tad Roberts

The argument around cost of power vs sail for ocean cruising can go on forever. The reality is that there are ten’s of thousands of available sailing vessels capable of ocean cruising, and only a handful of similarly capable power vessels. Sailing across an ocean (even if a great deal of it is under auxiliary) seems to hold greater appeal to humans than long-distance powering. The romance is just lacking.

Dashew’s finding that power cruising is less expensive does not apply to typical cruisers. The Dashew boat’s are key items in a multi-million dollar marketing campaigner, and they are maintained as such. Typical cruisers do not replace sails, lines, and rigging anywhere near as often as specified by Steve. They also do not put anywhere near as many miles on . Again the Dashew boats cover ground to make appearances.

Really small sails on a decent power boat can make a big difference. And the rig does not have to be the high-stress masthead sloop.

Ranger (the Paine/LM power cruiser) is closely based on a boat called Traveller (originally Maiden), designed and built in 1988 in California by Jim Millett. She is aluminum, of box keel vee-bottom form, 52′ overall and 48′ LWL, with beam at 12’9″, draft 4’6″, displacement 44,000 with 10,000 of lead ballast. Power is a 135HP Lehman with 3:1 reduction turning a 28″ by 23″ 3-bladed prop. She carries 1100 usg of fuel. In an artical in Passagemaker of Fall 1996 the owner claimed Traveller cruised at 7.5 knots at 1450 RPM and burned 1.4 usg per hour including 1.5 hours of generator time per (24hr) day. The boat carries a short sloop rig of 250 sq ft (138 main and 112jib) that will give them 3-4 knots boat speed in 12 knots of wind. The rig aids stability (comfort) only in beam or forward of the beam winds, so paravanes are fitted as well.

Marc Dacey

The vestigal rig indeed has benefits beyond stabilization of a decent (not too squat) trawler, I think, although they are rarely seen these days. Most motor-sailers (and we are supposed to own one in the “desirable” form of a pilothouse steel cutter-rigged sailboat with plenty of stowage and yet with stand-up access in the engine bay) are actually “sailer-motors” in the sense that they given little away as somewhat heavy sailing vessels that carry enough fuel for 1000 NM power-only voyaging. Certainly, that’s our mandate.

But we are fairly fixated, perhaps because we contemplate trades wind passagemaking over stalled Arctic high transits, on sailing to the best of our abilities in the heavy displacement boat we’ve got. Powering and the need to power is as often a function of scheduling as it is being driven nuts by slatting sails, and we wish to carry enough sail to keep moving in light airs where possible.

Of course, if we needed to go fast, we would hardly be on a sailboat in the first place.

By contrast, a small-rig-equipped trawler, or one flying one of the newer sort of “kite” downwind sails, has some options, either to reduce fuel usage or to go, in 15 knots or so, for “free”. If on a trawler you do not intend to work more to windward than 80 degrees or so, you could reap many of the sailboat’s advantages with far fewer of the expenses and related issues, particularly with a design that featured keel tankage for stiffness.

Such a “hybrid” might indeed find favour, as it needn’t resemble a 1920s-era North Sea fishing boat!

Robert

Some of the pros and cons are not tangible. I’ve always had sailboats but our future cruising plans will require a different boat than we have now. This power versus sail subject comes up a lot for us. Every time an article like this is written I spend time thinking about our actual needs. My conclusion is always the same…..the real economics (and even other considerations) of power or sail come out pretty close. Yes, a trawler is very comfortable and you can pilot in crappy weather in your PJs. But whenever we are sailing, in any conditions, my wife is smiling. I guess there really isn’t a decision to make until we literally cannot handle the lines, which I hope is along time away.

Robert

Alan

Enlarging on the above (and I generalise) there appear to be 2 main groups who gravitate to power boats/trawlers, firstly those who are new to boating and secondly those coming from sailing where I believe it is often on the ” Admiral’s direction”. I believe the latter is the case with the Dashews.
Carleton Mitchell wrote a very good article on why he changed from sail to power way back in the 60’s. I do not have a link so will send it to John to make available to all.
In talking about the power vs sail cost, Steve Dashew did qualify his comments about power being cheaper than sail had a cross over point somewhere between a length of 50 – 60′, ie less than this he agreed sail was the cheaper way to go. As we all know the wind is free, but to “catch” it is not!

Simon Wirth

Hei Alan
Thank you for the reminder!
I had forgotten that he did qualify his comments.
And nicely said, thank you!
But maybe, just to be faire, “Admiral’s direction” should be completed by the addition of “or constitution”?
Regards
Simon

Coen

Michael Kasten of Kastenmarine has several designs for cruising powerboats, some as small as 22ft, but with ocean crossing capability! Several of them share hull designs with sailing vessels. Tom Colvin also had a design or two for long range powerboats.

charley B

As a prior owner of both sail and power boats in size from 26’ to 50’ I have found that even when taking into consideration the additional acquisition and maintenance costs of the larger trawler engine or engines, the ongoing combined operational and maintenance costs were no cheaper on a sailboat. However, I have continually come back to sail because nothing seems to give me the joy and that “at peace with the world” feeling that I get when sailing with all mechanical shut down.

For me, due to family choices and the economics they created, it’s not until now that I can begin my multi-year cruising voyage from Alaska down through the canal, around the islands, up the east coast including Canada and then making the great loop.

Unfortunately, or fortunately, depending on whom you ask, now that I can take a few years and make this multi-year voyage, age and bad joints dictate that the boat I select will be a motorboat. Not only will the wider beam and larger displacement offer me comforts and conveniences over several years, IMHO I believe that no longer being a younger man I will have safer journeys not having to deal with the rigging.

I believe that as more and more of us grow older, more and more of us after arriving safely and comfortably at our destination will look to trade with a fellow cruiser some of those comforts/conveniences (ie. washer & dryer) that a trawler offers for the joy of that sunset cruise across the bay under sail.

RDE

Speaking of motorboats that can sail, or sailboats that can motor, here is a photo of one that ( mainly) motors from San Francisco to Mexico and back each year and motored in delivery mode from San Francisco to St. Barts and back for a single winter season. About 70hp per side drives her at 11-12 knots.

http://multihullblog.com/

I met with the owner, Richard Spindler (Latitude 38 editor) before he had her built so have a pretty good idea of the build cost. He wanted a functional workboat interior set up for large groups of people, and wanted a larger boat than our molds could produce, so ended up having it built in California.

This is a MUCH larger boat than Ranger— think three times as large although only 4′ longer. And I’m willing to bet that the actual build cost was not all that different based upon what I know about this design and other one-off aluminum construction projects, because Richard chose function over yacht finish.

I’m not suggesting that a 63′ sailing catamaran is a replacement for a Dashew 64 or the much narrower Ranger. But what people fail to realize is how efficient a catamaran with retractable daggerboards and narrow hulls can be under power. Not surprising, given that we are used to seeing condomarans where the hull design is driven by the absolute necessity of having a walk-around master berth in each hull and keels that have the primary function of protecting the hulls from grounding at the hands of bareboat skippers.

Of course if you choose to eliminate the mast and daggerboards your efficiency under power would go up even more. But don’t ask me. I’m sure Richard Spindler would be glad to bend your ear about his long term experience with Profligate, and maybe even talk about what he would do differently next time!

Hans

Hi John,
we were talking about Dieter’s Kaniva (www.kaniva.de). Dieter has just returned from his maiden voyage, from the Baltic to Newfoundland and back. Well, he’s not quite back, still in Scotland, checking out some distilleries. I will ask him to send you more detailed numbers , but here’s preliminary:
On the outward leg he covered 2.293 nm and burned 1310 ltrs. of diesel which is 0,57 ltrs./hr. (0,15 gallons/hr) , which comes to 6,67 miles per gallon.
Average speed 5,97 knts, aux. sail up most of the time except for 1.6 days.
His stabilizing flopper stoppers cost him 0,6 to 1 knot of speed, depending on conditions.
Hans

Lee Fisher

Hi John,
Firstly thanks for your great site – I’ve been a follower for a while and have gained a lot from it. I’m rather surprised to find myself posting a comment here though because although we are live-aboard cruisers our boat is a motor boat, and we confine our adventures to coastal passage making. Still, we have covered over 10,000 NM in our twin-engine displacement motor cruiser, and kept reasonably good records along the way so here goes: Our boat is 12 meters and around 40,000 lb in cruising trim (well, I do like to carry a good spares kit!). We cruise mostly in good sea conditions at around 6 Kt using about 3.5 lph (total, both engines). Our case is perhaps vindication of your proposal about hull efficiency vs. interior space, and we also benefit from a number of the suggested design improvements in the ‘A Better Idea’ part of your original post. Perhaps our 1938 boat and its original engines are the future? Cheers, Lee

RDE

Hi John,
I beg to differ. Fuel efficient catamarans are most certainly different from the slow but fuel efficient narrow powerboats of the past. And they have been around for long enough—at least two decades— to develop all the data necessary to prove their efficiency.

In the case of the commercial boats working in Hawaii, they have to operate in occasionally substantial sea conditions while carrying 50-100 tourists, and keep them from puking. Not a North Sea test, but certainly not like putzing around in the Drake Lake on a condomaran either. The other thing they have to do is run fast to make schedules. This wake shot of HOLO HOLO running 27 knots certainly tells something about efficiency.
https://www.facebook.com/photo.php?v=531218350267143&set=vb.141840345844262&type=2&theater

Now this boat is probably using 5-600 hp to run that fast which I’d guestimate burns 25-30 gph. By comparison the Viking 55 with twin 1100 hp MANs that I delivered burned 70 gph at that speed, and it was carrying 3 crew instead of 45. Perhaps half as large a boat in total volume and twice the fuel consumption. So I’d think that the power catamaran does represent something new in fuel consumption even in high speed mode when the sport fisherman was up on plane.

I gather from the total lack of response to my series of comments on that topic that catamarans aren’t of interest to people who visit this site. Fair enough, different boats for different folks, so I won’t flog the catamaran horse any more. And I do agree that classic styled powerboats are cuter.

Alan

Richard,
if you look to Australia and New Zealand there is a very strong power catamaran presence there. The Holo Holo cat looks like one of New Zealander Malcolm Tennant’s designs (or a close copy) until his untimely death Malcolm developed a specialty in high speed displacement ocean crossing cats.
One of note is Domino, chronicled in the blog
http://dominocatamaran.blogspot.com.br/#!/
what the owners went thru to have the cat built in Paraguay was a story in itself.

Kit Laughlin

Cats are of interest to my wife and I; we own one and live aboard. One of the really interesting things about well-designed cats is that they can be run at a little faster than hull speed really efficiently, but can also plane at 12.5kn using about twice the fuel per nm. We are looking at a Roger Hill design for the next boat.

Pip Wick

Thanks for the motorboat comments. We own a 48′ cutter, 34,000# fully loaded, and have just completed a voyage from Maine to the Azores. The interesting part of the motorboat thing is that Lucayo has a diesel-hybrid motoring system, installed after long effort about four years ago. The boat motored at about 4 miles per gallon under her old 74 hp Westerbeake doing 6 knots.
With the new system she motored 1100 miles (a very calm trip) on 105 gallons of fuel on the Azores trip. At slower speeds the efficiency of the new system is better, but not as exceptionally so as with running a diesel engine at very low speeds. Gains from motorsailing are marked though. We hold 262 gallons of fuel, not all of which is reachable, but I’m sure we could have made the entire 2000 mile trip under power alone.
While the 9.2 kw dc (12 hp) rating for the electric motor sounds low, electric power gives very high torque, and six knots in calm water is a good cruising speed. This is also one of the quietest ways of powering a boat imaginable.
There are a few drawbacks, since we use AGM lead acid batteries she weighs about 900# more than with the older system. This can be eliminated with lithium batteries, and the efficiency would be better also. Cost of the exotic batteries is higher, but life of the system gets markedly better.

Pip Wick

Dear John,

Thanks for your comments on the diesel hybrid drive, and I am aware of them. There is one interesting factor. We know that while a properly sized engine would be the most efficient, we also know that rarely are engines run at their best speeds, and “not best” speeds can have efficiencies in the 20-40% range. With a generator turning at a high productive rate, and the batteries taking over the running of the system between charges, we do seem to come up with superior economy. Using a DC motor gives us more flexibility than AC would, too. At about four knots we seem to get about 12 MPG.

Obviously, it would be best to run long trials to get absolute numbers on efficiency, but over long trials, conditions change. On our Azores trip, sometimes we would motor-sail, sometimes motor more slowly, and when sure of our fuel mileage and trying to make best times, we would speed up. The state of the wind and waves constantly changed also. It is like trying to nail Jello to the bulkhead. Our fuel mileage is rough at best. Until someone makes bench tests under controlled conditions there can be no positive answers. My best guess right now is in the 9-12 MPG range.

We had a 12 horsepower diesel in an earlier boat, and while it would run a long time on very little fuel, it made so much noise and vibration that the crew would fall asleep. That engine burned 3/8ths of a gallon per hour which gave us a mileage of about 16 MPG, but the boat was only about half the size of our present one, and far lighter.

We live in Brooklin, ME, not far from where you seem to be based, so perhaps we will run into Morgan’s Cloud sometime. Although, at present we seem to spend more time away from our native waters than at home. I look forward to meeting you sometime.

Regards, Pip Wick

Neil McCubbin

John makes the point that he and Phyllis motor a lot, because they are in the Arctic. I agree all too willingly, sitting here in Tromso, and having motored more this year (up the Norwegian coast) then we ever have.
However, in more southerly latitudes we motor MUCH less.
I met a Nordhaven-like 50 footer (Krogen or some such name, very well built little ship) in Sognefjord a few years ago. Seeing his Canadian flag got us talking. Wondering about the reality of crossing the Atlantic under power, I asked what speed a ship like his maintains on long crossings. He replied that they averaged 150 miles/day across the Atlantic. We had averaged 170 in the same year in our 47 foot centerboader. I do not know his fuel consumption, but ours was about 75 litres for the 3500 miles, much of it for battery charging and our mechanical refrigerator/freezer.

George Branch

The boat you want and more, exists! It’s called an Elling E3 or E4.

James Grote

The motorboat you are looking for is one of Nigel Irens Rangeboats. Period. Try the 39′ Rangeboat prototype or the 63′ “Molly Ban”.

Damien Ashdown

Really Interesting Discussion

So my wife and I have spent the last four years cruising in our 28 foot sailing yacht. We brought the yacht because we wanted to go to some fairly remote places and our yacht is built like a bomb shelter. The thing we didn’t factor in is being a pocket cruiser it is not fast by any means and can be a bit of a pig in light sloppy conditions which we encounter surprisingly often. When motoring in this boat, because the engine is smack in the middle of the only living space available its about as pleasant as sipping a sundowner while a road worker jack hammers a hole the the pavement next to you…

My wife is also physically challenged in terms of strength and stamina (only the body, certainly not in the head!) and struggles with our tiny sails at times and gets nervous when the wind picks up as she must rely on me to solve anything anchor related as we struggle to store enough energy to run to many auto thingys most systems on the boat are 100% manual.

So we changed tack.

Rather than fight to obvious challenges of cruising in a tiny boat we realised that we can afford to cruise in a motor boat if we take a different approach,

We had some criteria as high lat cruising is where we want to be.

We wanted a boat of 55-60ft so we could take enough gear to be self sufficient for up to 6 months if we had to be.
We wanted steel (im an engineer) as its tough, cheap, can be beefed up if needed and can be fixed almost anywhere if we break it.
We wanted it to be super simple so we could spend the least time fixing it and the most time using it
We also didn’t want to take a mortgage for fuel every time we went anywhere nor have the carbon footprint that would entail.

So we found a boat that fit all of our major needs but still couldnt solve the fuel cost/carbon issue.

Until we converted to oil…

We found through testing and a bunch of european university studies that we can run this trawler on waste cooking oil which is 100% carbon neutral and costs us around $0.30 per litre. I also like the fact that as its fully biodegradable should anything happen and we spill our fuel in the ocean it won’t cause any major or lasting damage (not that i’m envisioning this happening).

The boat we chose was an ex fishing trawler that we stripped and have almost completed a full rebuild to suit our needs. I love the fact that we can take the time with each part and set it up properly (ie boat gets modified to suit the right anchor, rather than the ridiculously small one that fits and meets basic survey requirements).

I know a lot of people jump on power boaters (and as a sailor I would say many can be unbelievably ignorant of the giant wash they leave as they plough past) but I think it is possible to have a good power cruising boat that is safe, strong and affordable, particularly for older cruisers who struggle hauling sails, winch things and stand watch outside in the cold etc.

Paul

I haven’t read everything about this boat, but what I have read on the website so far confuses me…

Does anyone know what the windows are made from? I ask because elsewhere on this website there are very harsh words for SAILboats with large pilothouse windows. However, I haven’t seen similar criticism of the large windows on this POWERboat. Why no discussion of the need for storm windows/shutters on this fancy new boat? (Apologies for asking this if it’s here on the website and I missed it.) Maybe the window on this boat are made from some super strong material. If so, I’d like to know exactly what.

There are lots of motorboats (“trawlers” and the like) that do just fine cruising just about everywhere despite having big pilothouse windows (and of course real fishing trawlers do it). This boat will do the same, presumably. Consequently, I’m having trouble getting my head around why big windows are apparently “safe” for this boat but not safe if the same windows are on a sailboat. (I’m not mentioning the added safety — righting force — of a pilothouse in a knockdown, assuming the windows don’t blow in.)

Disclosure: I have a motorsailing with a big pilothouse, and windows to match. I love love love the pilothouse (but I don’t like sun, or rain, or cold, or living in a cave-like cabin…). Of course I’d hate hate hate the pilothouse if I got knocked down and the windows didn’t hold up.

Paul

Thanks John. I think we can agree that strong window are needed, which I guess applies to every boat going very far. What I like about this powerboat is they have decided that big windows are desirable, and then apparently dealt with that — instead of the more common approach which is to avoid the big windows. Determining what this says for those of us who won’t be having one of these powerboats built is difficult to decide. I wonder if anyone reading this knows of actual accounts of boats with big windows getting knocked down, and what the consequences were. I supposed we’d only hear about the bad cases and not the good ones.

I’m tempted to add the following to the discussion about pilothouse windows, but it’s an old thread that you may not want to reopen:

The largest window on my boat’s pilothouse, which is probably about three-feet square, had to be replaced (due to a slight optical imperfection). It was impossible to remove the window with a sledge hammer. As anyone who knows about safety glass will guess (and as alluded to elsewhere on this website), it was necessary to use a sharp tool to poke holes in it, then break it apart that way. In other words, it’s very strong stuff. But is it strong enough? No way to know. (Which is a reason for a series drogue — to avoid having to find out!)

Kit Laughlin

For me, this is an extremely interesting thread; thanks John!

A 38′ motor sailer I am inspecting next month has had its pilot house side windows replaced by 10mm perspex, and commercial trawlers in our area (South Coast Australia) pretty much only use this material for windows. Their position is that, even though optically they are not as good as safety glass, experience has shown that they are more resistant to failure in big seas. This is anecdotal, I know, but for me an interesting datum point nonetheless. And perspex is easier to work with, too, I believe.

John, you wrote, “Norwegian fishermen, for one, have been doing this with slow revving high torque engines matched to controllable pitch props for years with spectacular fuel economy results”; again, here, no one uses these commercially, yet in the EU zone, are considered standard. An automatic CPP will be the first upgrade I will make on the next boat, for exactly this reason (not to mention increased engine life).

Thanks again, KL

Kit Laughlin

John,

I was thinking of the Brunton Autoprop; their claim is that the prop will increase pitch to the maximum that the available torque allows, and that can happen at any r.p.m. Having said that, I have not seen any what I would call thorough reviews and comparisons. And when the shaft has still, the prop. also feathers automatically, which seems like a bonus for a true motor sailer.

Re. perspex: where we are, fogging does not seem to be a problem, and Steve has much deeper pockets that either of us, I imagine! Yes, his research is most thorough. Thanks John.

Kit Laughlin

Thanks for that, John. As always, re-reading makes everything clearer. My next boat will have a CPP for sure.

Jock Beebe

John,
Having just discovered AAC’s superb website and become a subscriber, I found the very interesting discussion of power versus sail boats, “A Sailor’s Motorboat,” from 6 years ago. Because most of that article and its comments revolve around Robert Beebe’s ideas, published in 1975 as Voyaging Under Power, I thought it might be relevant to make a current comment.
Robert Beebe (RB) was my uncle and mentor on all things nautical including at least the basics of boat design enough to learn from the differences among them. BTW, although he is known as “the power boat guy,” he was a very accomplished sailor, built several sailboats himself and designed quite a number of successful sailboats including teaming up with Howard Chapell to design some great sharpies.
Back to the point, although a life-long sailor myself, having twice sailed across the Pacific and cruised in the Southern ocean with small family crew, I had the good luck to bring Robert Beebe’s famous PASSAGEMAKER, a 50 foot power boat with both a substantial auxiliary sailing rig and flopper stoppers, across the Atlantic from the Med to U.S. This gave me ample opportunity to test the relative merits of the two stabilization methods while off shore. Although I began that passage thinking that sail would beat paravanes, I ended up favoring flopper stoppers. Why?
Most sailors regard the large poles and associated rigging of flopper stoppers with alarm deriving from their appearance and unfamiliarity. But I believe they beat sailing rigs because:
1. Less expensive to build and maintain than a full sailing rig
2. Easier to deploy and retrieve than hoisting, trimming and furling sails
3. Less ongoing attention to sustain efficiency when deployed (set and forget vs. re-trimming)
4. Effective stabilization regardless of relative wind direction
5. Most of all much greater actual motion reduction (leave coffee cup on the table) while underway in real seas, and also while anchored, often underappreciated in rolly harbors until experienced
6. Minor increased drag effect if properly rigged (about ¼ knot at most on Passagemaker) that might be less than windage of a stowed sailing rig powering head to wind.
Also, in your original article, including its comments, I did not find mention of one of Beebe’s most compelling additional power boat advantages – the ability to “control” weather by setting a course in any desired direction to avoid stormy conditions. Even with modern weather information across oceans, it’s not easy for sailboats to promptly alter course to avoid the worst or all of stormy foul weather. But a motor vessel able to make 200 mile days can usually do so.
Even though Beebe’s original book, now recently published in its fourth (!) edition, has become transformed by inclusion of varied additional information, it still contains his clearly expressed points about the merits of off shore passage-making power boats in comparison with traditional sailboats. Today’s sailors will find lots of thought provocation from reading them in the original.
Hugh (Jock) Beebe